Wireless
 Universal Wireless Alarm Communicator GS3060 * Compatible with control panels that communicate using the Contact ID format
* Full event reporting
* Uses GPRS data channel for high-speed, reliable and low cost communications to an IP receiver
* 4 on-board inputs
* 4 on-board outputs (open collector)
* SIM card (included)
* Activation and initialization via automated telephone
activation system (VRU) or web-user interface provided by CONNECT 24™
* Panel transmission monitors capability
* Compatible with Sur-Gard System II/III monitoring station receivers
* UL/ULC listed
 Universal Wireless Commercial Fire Alarm Communicator GS3055-ICF
* Compatible with control panels that communicate using the
* Contact ID format
* Full event reporting
* Uses GPRS data channel for high-speed, reliable and low-cost communications to an IP receiver
* 4 on-board inputs for standalone operation
* 4 on-board outputs (open collector)
* SIM card (included)
* Activation and initialization via automated telephone activation system (VRU) or web-user interface provided by CONNECT 24™
* Compatible with Sur-Gard System II/III monitoring station receivers
* Includes UL listed power supply, transformer and 7 Ah rechargeable battery
* UL 864 and CSFM listed
 Alarm Communicator - GS3055-IG and GS3055-IGW
-Compatible with any control panel that communicates
* using the Contact ID format Full event reporting
* Uses GPRS data channel for high-speed, reliable and low-cost communications to an IP receiver
* 4 on-board programmable inputs
* 4 programmable outputs (open collector)
* SMS dialer feature allows 13 preset text messages to be sent upon alarm events
* Up to 8 programmable phone numbers for SMS dialer
* Up to 95 phone numbers to control the programmable outputs
* Dual-band: GS3055-IG (850 MHz/1900 MHz); GS3055-IGW
(900 MHz/1800 MHz)
* 4 status LEDs to indicate signal strength and operation
* GPRS communications compatible with Sur-Gard
System II/III monitoring station receivers
* Pay-as-you-go balance message for prepaid SIM cards
(SIM card not included)
* NOT available in North America
 TL250D Communicator
-Connect TL250D to existing Sur-Gard and DSC DVACS controls Allows DVACS information to be converted to IP and transmitted over the internet
* Uses 128 bit AES encryption
* ULC Level (4 and 5)
* Requires communication to a Sur-Gard System III receiver with a DRL3 IP line card
| |
Network
 T-Link Ethernet Communicator
The T-Link TCP/IP transmitter is compatible with the Power864 and MAXSYS control panels. It works within a proprietary LAN/WAN (intranet) to communicate alarm signals efficiently and economically to a SG-DRL-IP central station receiver line card. The T-Link connection is fully supervised when used in conjunction with the SG-DRL-IP receiver line card. Any tampering or network trouble will be detected. This allows the administrator to respond to the situation instantly. With the use of DSC’s DLS™-3SA downloading software, site administrators can request information from the panel, change user information, generate status reports and gather daily maintenance details (schedules, arm/disarm information) from a PC via the TCP/IP network.
 TL250
* Supports Power 864, New PowerSeries ™ and MAXSYS® control panels
* Instant, always-on IP communication
* Works over local LAN/WAN network or the Internet
* 128-bit AESencryption (NIST approved)
* Supports DHCP (dynamic IP addresses)
* Low network bandwidth requirements
* Compatible with 10/100BaseT networks
* Reports events to 2 different receiver IP addresses
* Polling and hardware substitution protection
* 4 on-board programmable inputs and 2 programmable voltage outputs as stand-alone module
* Programmable through the system keypad, PK5500 LCD keypad or T-Link Console software
* Software upgrades via network
* Download control panel via Internet with DLS2002SA software
* UL, CSFM and ULC Level 3/4/5 Listed
 Universal IP Alarm Communicator
* Compatible with most control panels that use the Contact ID format
* Instant, always-on IP communication
* Works over local LAN/WAN network or the Internet
* 128-bit AESencryption (NIST approved)
* Supports DHCP (dynamic IP addresses)
* Low network bandwidth requirements
* Compatible with 10/100BaseT networks
* Reports events to 2 different receiver IP addresses
* Polling and hardware substitution protection
* 4 on-board programmable zone inputs and 2 programmable voltage outputs as stand-alone module
* Programmable through the PK5500 LCD keypad or T-Link Console software
* Software upgrades via network
* UL, CSFM and ULC Level 3/4/5 Listed
 T-LINK™ TL150 Residential IP Alarm Communicator
The TL150 residential IP alarm communicator is effective in a backup or primary alarm communications role and provides homeowners with the ability to arm/disarm their security system and view the status of individual zones through a webpage on their home computer.
* Supports all PowerSeries control panels
* Compact, easy-installation design
* Homeowners can arm/disarm security system and view zone status through a webpage on their home computer
* Instant, always-on IP communication
* Works over local LAN/WAN network or the Internet
* 128-bit AES encryption
* Supports DHCP (dynamic IP addresses)
* Low network bandwidth usage
* Compatible with 10/100BaseT networks
* Supervised as a KEYBUS module (supervision of both KEYBUS and network connections)
* T-Link programming (IP address and account number) through a web-browser interface
|
